To Create an Auto Round Feature on Selected Edges
1. Click
Model, click the arrow next to
Round, and click
Auto Round. The
Auto Round tab opens.
2. Click the Scope tab and select Selected Edges. The selected edges collector is activated.
3. Click
Tools >
Find. The
Search Tool dialog box opens.
| Instead of using the Search Tool, you can also select the edges in the graphics window to be included in the Auto Round feature. |
4. Under Look for, select Edge or Intent Chain, as required.
5. Under Look by, select one of Edge, Feature, Group, or Intent Chain.
6. Click the Attributes, History, Status, or Geometry tabs and specify the criteria by which you want to search for edges or intent chains.
7. Click Find Now. The Search Tool displays the results in the items found area of the Search Tool dialog box.
8. Select the required items in the items found area. The corresponding items are highlighted in the graphics window.
9. Click
to transfer them to the
items selected area of the
Search Tool dialog box.
10. Click Close in the Search Tool dialog box.
11. Click Auto Round > Scope. The selected edges are added to the Selected Edges collector.
12. Specify other options as required and click
to create an Auto Round feature.