Part Modeling > Engineering Features > Round > To Create a D1 x D2 Curvature Continuous Round
  
To Create a D1 x D2 Curvature Continuous Round
1. Create a constant round and leave the Round tab open.
2. Click the Sets tab.
3. Select D1 x D2 C2 from the cross section shape box. The following items appear:
On the Round tab, the C2 Shape Factor, D1, and D2 boxes.
On the Sets tab, the C2 Shape Factor box.
In the graphics window, shape factor and conic distance drag handles
4. Enter a value from .05 to .95 in the C2 Shape Factor box, or drag the handle to the desired preview shape.
5. Enter values in the D1 and D2 boxes, or drag the handles to set the leg lengths.
 
* Click to switch the leg length values.
6. Click .