About the Trajectory Rib User Interface
The
Trajectory Rib tab consists of commands, tabs, and shortcut menus. Click
Model, click the arrow next to
Rib, and click
Trajectory Rib to open the
Trajectory Rib tab.
Commands
• 
—Switches the depth direction to the other side of the sketch. The rib is extended to the next solid surface encountered.
• 
—Sets the rib width value.
• 
—Adds drafts to the side surfaces.
• 
—Adds rounds to the rib-to-rib and rib-to-model edges.
• 
—Adds rounds to the exposed edges.
Tabs
• Placement
◦ Sketch collector—Displays the sketch reference of the Trajectory Rib feature.
▪ Define—Opens Sketcher so you can define a sketch.
▪ Edit—Opens Sketcher so you can edit a sketch.
• Shape
Use this tab to define rounds and a draft angle and to preview a cross section of the rib.
◦ Round top by—Sets the round radius on the upper part of the rib.
▪ Two-Tangent round—Creates a full round. It is driven by a relation that is dependent on the width and draft angle of the trajectory rib.
▪ Specified Value—Opens a value box for the round radius.
◦ Round bottom radius—Defines the round radius at the internal edges.
▪ Same as top—Available only when Specified Value is selected for the upper radius.
▪ Specified Value—Opens a value box for the round radius.
◦ Width box—Sets the rib width.
◦ Draft angle box—Sets the rib draft angle.
• Properties
◦ Name box—Sets a name for a feature.
◦ 
—Displays detailed component information in a browser.
Shortcut Menu
Right-click the graphics window to access shortcut menu commands.
• Define Internal Sketch—Opens the Sketch dialog box enabling you to use Sketcher to define an internal section.
• Edit Internal Sketch—Opens the Sketch dialog box enabling you to use Sketcher to edit an internal section.
• Clear—Deletes the sketch reference for the rib feature.
• Add Internal Rounds—Adds rounds to the rib-to-rib and rib-to-model edges.
• Add Exposed Rounds—Adds rounds to the exposed edges.
• Add Draft—Adds drafts to the side surfaces.
• Flip Depth Direction—Switches the depth direction to the other side of the sketch.
• Show Section Dimensions—Display the sketch dimensions in the graphics window.
• Hide Section Dimensions—Removes the sketch dimensions from display in the graphics window.