Part Modeling > Edit Features > Move > To Move All Features in a Part
To Move All Features in a Part
* Moving with this method creates a duplication of the entire part and also a merge feature that contains all the geometry of the features of the part.
1. In the Model Tree, select all features in the part and the part header.
2. Click Model > Copy. The entire feature is copied into the clipboard.
3. Click Model > Paste Special. The Paste Special dialog box opens.
4. Click the Apply move/rotate transformations to copies check box. You can choose whether to make the copy dependent or not.
5. Click OK. The Move tab opens.
6. Click to translate the move item or click to rotate the move item.
7. Select a direction reference:
Datum axis
Plane or flat surface
Straight curve
Axis of datum coordinate system
* You cannot select a plane or flat surface if you are rotating the selected item.
When translating, the direction reference is perpendicular to the direction in which you want to move when you specify a plane or flat surface as the direction reference. If you select an edge, curve, or axis, the direction reference is parallel to the selected edge, curve, or axis. When rotating, the direction reference is usually an axis or straight edge about which the move item pivots.
8. To move the selected item:
In the graphics window, use the drag handle to manually translate/rotate the move item to the desired distance or angle.
On the Move tab, type a distance or angle value in the value box, or select a value from a list of the most recently used values.
9. If you want to create additional translation or rotation transformations, see To Create Multiple Moves. Otherwise, click to complete the move feature.