Creo Flexible Modeling > Patterning Creo Flexible Modeling Geometry > Direction > To Create a Direction Pattern using Rotation in Creo Flexible Modeling
  
To Create a Direction Pattern using Rotation in Creo Flexible Modeling
1. Click Flexible Modeling > Flexible Pattern. The Pattern tab opens.
2. To set the pattern type, select Direction from the list.
3. To select references to define the pattern leader, click the References tab, and perform any of the following actions:
Click the Leader surfaces collector, and select surfaces. If needed, click Details to open the Surface Sets dialog box.
Click the Leader curves and datums collector, and select curves and datums.
4. To pattern the selected rounds and chamfers that attach the patterned geometry to the model, click the References tab and check the Transform selected attachment rounds/chamfers check box. If you do not check this check box, the selected attaching rounds and chamfers are removed and optionally recreated.
5. To select rotation as the pattern creation method, next to 1, select .
6. To select an axial reference, click the first direction collector and then select one of the following entities:
Linear curve
Axis of a coordinate system
Datum axis
The system creates a default pattern of two members, indicated by a black dot, in the selected direction.
7. To reverse the direction of the pattern, click .
8. To set the number of pattern members in the first direction, type a value.
9. To change the angle between the pattern members, type a value or drag the handle.
10. To add pattern members in another direction:
a. To select translation as the patterning method, next to 2, select .
b. Click the second reference collector and select a direction reference for the second direction.
c. To reverse the direction of the pattern, click .
d. To set the number of pattern members in the second direction, type a value.
e. To change the angle between the pattern members in the second direction, type a value or drag the handle.
11. To set the attachment options, click the Attachment tab and do the following:
To attach all pattern members to the model geometry, select the Attach pattern members check box.
 
* When the Attach pattern members check box is not selected, the resulting geometry is a quilt. The appearance of the original solid surfaces is propagated to both sides of the resulting quilt.
To attach all pattern members to the model geometry with rounds or chamfers of the same type and dimensions as the pattern leader, select the Create rounds/chamfers check box.
12. Click .