Other Modules > Working with Drawings > To Enter Legacy Drawing Mode to Create a Drawing
  
To Enter Legacy Drawing Mode to Create a Drawing
1. Click File > New. The New dialog box opens.
2. Click Drawing in the Type box to specify the type of Legacy object.
3. Type a name for the drawing in the Name box or accept the default.
4. Click OK. The New Drawing dialog box opens.
5. Click any of the following to specify the template:
Use template
Empty with format
Empty
6. Click OK.
7. Click Layout > Sheet Setup The Sheet Setup dialog box opens.
8. To specify the size, from the Size box select  Inches or Millimeters and type values in the Width and Height boxes.
9. Select one of the following from the Orientation box:
Portrait—Makes the height larger than the width and selects a standard size.
Landscape—Makes the width larger than the height and selects a standard size.
10. Click OK. The drawing is displayed as specified.
11. Click the Legacy button from the Quick Access Toolbar or the tab on the ribbon.
 
* Before you can enter the Legacy mode, you must add the Legacy button to the Quick Access Toolbar or to an existing tab on the Creo Parametric Ribbon user interface. Refer To Enter Legacy for details.