Mold Design and Casting > Using the Ejector Pin Catalog > To Trim an Ejector Pin Set
  
To Trim an Ejector Pin Set
The Trim to Geom feature is a part-level feature.
1. Perform one of these operations:
Click Mold > Catalog > Ejector Pin > Trim To Geom.
Click Cast > Component > Catalog > Ejector Pin > Trim To Geom.
In Mold Layout, click Mold > Catalog > Ejector Pin > Trim To Geom.
2. Select an ejector pin from the set. The selected set is highlighted. The Trim Components dialog box opens.
3. For a variable set, select an ejector pin from the Set Members window to perform the operation.
4. Specify the type of object to use for trimming. Click Part, Quilt, or Plane.
5. Select a bounding object.
6. If you are trimming by a part or by a closed quilt, click Trim Type. You can trim by the first or the last intersecting surface.
7. If you want to trim with an offset from the bounding surface, type the offset value in the Offset field.
8. Click OK to finish.
If a trimming plane intersects ejector pins from an Identical set at different heights (for example, if the trimming plane is inclined), you must redefine the set to Variable so you can trim each ejector pin correctly.