Creo Tolerance Analysis > Circuit Card Tutorial > Circuit Card Tutorial > Specifying measurement limits and so forth
  
Specifying measurement limits and so forth
Before examining the results, let’s review the measurement definition.
1. Name the new measurement Fit_Clearance in the Analysis Name field.
In this design, some clearance between the plug and the pan is important, so the minimum value for the measurement is 0.0. The upper limit is not important for this measurement.
2. In the Goal region at the top of the Tolerance Analysis window, change the measurement tolerance type to Limits. Enter an upper value of 1.0 and a lower value of 0.0