To Create a Toolkit-Based Analysis Feature
1. Click
Analysis >
Analysis. The
ANALYSIS dialog box opens.
2. Under Name, accept the default name or type the name for the analysis.
3. Under Type, select Toolkit-Based.
4. Under RegenRequest, specify the regeneration option by clicking one of the following options:
◦ Always—Always regenerate the analysis feature during the model regeneration.
◦ Read Only—Exclude the analysis feature from the model regeneration.
◦ Only Design Study—Regenerate the analysis feature only when it is used by a design study.
5. Click Next to define the analysis. The Toolkit-Based dialog box opens.
6. Under Type, select an application supplied by Creo Parametric TOOLKIT.
7. Click the Analysis UI button. This brings up the user interface defined by your Creo Parametric TOOLKIT application.
8. Follow system prompts to make selections as specified in your Creo Parametric TOOLKIT application.
9. Click Compute to perform the analysis.
10. Click Close to return to the ANALYSIS dialog box.
The Result params window opens. All cells selected for the output settings appear in the Result params table. The table lists the parameter status, parameter name, and description.
11. To create a parameter, select it from the Result params table and click YES under Create.
12. Under Param name, accept the default name or type a name for the parameter.
13. Click
to create the Toolkit-Based Analysis feature or click
to exit without saving any changes.