To Change the Tolerance Table Reference
1. Click
File >
Prepare >
Model Properties. The
Model Properties dialog box opens.
2. Click change in the Tolerance line. The TOL SETUP menu appears.
3. Click Tol Tables. The TOL TBL ACT menu appears with the following commands:
◦ Modify Value—Displays the tables in the TOL TABLES menu. You can modify their contents using Pro/TABLE.
◦ Retrieve—Retrieves a set of tables into the model.
◦ Save—Saves the tolerance table.
◦ Show—Displays the tolerance table.
4. Do one of the following:
◦ Choose Modify Value, select the table by choosing General Dims or Broken Edges, and select the dimensions.
◦ Choose Holes or Shafts; then type the table name and class number. Hole and shaft tables must be retrieved into the model before values in the table can be modified.