To Create a Re-roughing NC Sequence

1. Ensure that the active operation references a Mill or Mill/Turn work center.

You can also create or edit a step from the Process Manager. For details, see To Insert a Milling Step.

3. Select

, or

for milling on Head 1, Head 2, Head 3, or Head 4.

The Head Selector options are available only if the operation references a Mill-Turn or Lathe, and if both heads are activated in the work center.

4. Click

Tool Manager or select

Edit Tools from the tool list box to open the Tools Setup dialog box and add a new cutting tool or change tool parameters. The tool list only includes tools that are valid for the step.

To show tools for the current step and the active head on the machine tool, set the INCLUDE_ALL_TOOLS_IN_LIST option to YES.

Alternatively, right-click in the graphics window and select Tools.

5. To preview the cutting tool and its orientation in the graphics window, click

to the right of the tool list box. The

button becomes available once a tool is selected.

Alternatively, right-click the graphics window and select the Tool Preview option on the shortcut menu. After you select a tool, the Tool Preview option is available on the shortcut menu of the graphics window.

To exit the tool preview, right-click the graphics window and select Cancel tool preview from the shortcut menu.

6. Select a reference NC step from the collector adjacent to

. You can select only an existing Roughing or Re-roughing NC step. This is the NC step to be cleaned up.

7. To change the coordinate system that defines the orientation of the step, click the collector adjacent to

and select a coordinate system. If the operation coordinate system differs from the step coordinate system, right-click the collector for the following commands:

◦ Default—Replaces the selected coordinate system with the default reference. The default is the orientation that is copied from the previous step or from the operation.

◦ Information—Displays the information of the selected coordinate system.

After you specify a coordinate system for an NC sequence, it remains in effect until you change it.

Alternatively, right-click the graphics window and select Orientation from the shortcut menu.

◦ The Machining Reference box is selected automatically based on the reference NC step. You can also select a different mill window from the graphics area or Model Tree. Alternatively, right-click the graphics window and select Machining Reference.

To create a new mill window on the fly, click

Geometry >

Mill Window on the Re-rough tab. The Window tab opens. See the Related Links for more information on creating a mill window.

◦ Surface Side—Specify which side of the surfaces to machine. Use this option to check which side is selected, or to change the side. This option is for models with quilt geometry, such as imported models, where the material side is not defined. By default, the system selects a side to machine.

9. On the Parameters tab, specify the required manufacturing parameters.

You can also click

to copy parameters from an earlier step or click

to edit parameters specific to Corner Finishing. By default, the required parameters are defined by relations that you can modify from the Relations dialog box.

Alternatively, right-click the graphics window and select Parameters from the shortcut menu.

10. On the Clearance tab, optionally specify the following:

◦ Retract—Specify the Type, Reference, Orientation, and Value for the retract definition

◦ Start and End Points—Specify the Start point and End Point for the step tool path.

Alternatively, right-click the graphics window and select Retract. You can also select the Start Point and End Point of the cutting tool from the shortcut menu.

11. On the Options tab, open a part or assembly to use as a cutting tool adapter. Alternatively, click

to copy cutting tool adapter from another step.

12. Select options on the Tool Motions tab to create, modify, and delete tool motions and CL commands for defining cut motions. For details on all the tool motions, see the topics under Related Links.

Alternatively, right-click the graphics window and select Tool Motion Options.

The Return to Step Options option on the shortcut menu in the graphics window enables you to switch from editing tool motions and editing step reverences. This option is available only when all references for tool path computation are successfully defined.

13. Click

to get a dynamic preview of the tool path in the graphics window.

14. On the Process tab, optionally use any of the following options for the machining step:

◦ Calculated Time—Click

to automatically calculate the machining time for the step. The Calculated Time box shows the time.

◦ Actual Time—Specify the machining time.

◦ Prerequisites—Click

. The Select Step dialog box opens. Select an existing step that is a prerequisite for the new re-roughing step. Click OK.

The Prerequisites option is available on the Process tab while creating or editing a step from the Process Manager.

15. On the Properties tab, optionally specify the name or comments for the step.

◦ Name—Displays the name of the step. You can type another name.

◦ Comments—Type the comments associated with the step in the text box or use the following options:

▪

—Read in an existing text file containing step comments and replace any current step comments.

▪

—Insert the contents of an existing text file of step comments at the cursor location. Preserve any current step comments

16. After you define the mandatory step elements, the following buttons become available:

◦ To perform gouge checking against surfaces of the reference part, click

◦ To view the simulation of material removal as the tool is cutting the workpiece, click

. The Material Removal tab with integrated simulation environment opens.

17. Select one of the following options to complete the sequence:

◦ Click

to pause the process and use one of the asynchronous tools or click