To Set Up Retract Along a Revolved Surface in the Process Table

Manufacturing > Process Manager > Working with the Process Table > Creating Retract Surfaces > To Set Up Retract Along a Revolved Surface in the Process Table

1. Click

in the Process Table while modifying an operation, milling step, manual milling cycle, or a hole making step. The Retract Setup dialog box opens.

2. In the Type box, select Surface.

3. Select the revolved surface. The selected surface appears in the Reference collector.

4. To copy the retract definition from another step, select the step from the process table. The retract definition is copied from the selected step and its reference is highlighted in the graphics window.

5. Click OK to set up retract along the revolved surface.