To Specify the Display of Individual Datum Entities
You can use the Entity Display tab in the Creo Parametric Options dialog box (File > Options) to specify the display status of individual datum entities independently from their names (tags).
The following datum display options are available in the Entity Display tab under Datum display settings:
• Show datum planes—Displays datum planes and their names. Note that when you turn off the datum plane display by clearing the check box, this will not affect a datum plane that is set as a reference datum for geometric tolerances. This can also be set using the display_planes configuration option.
• Show datum plane tags—Displays datum plane names. This can also be set using the display_plane_tags configuration option.
• Show datum axes—Displays datum axes and their names. Note that in Drawing mode, when you turn the datum axis display off by clearing the check box, only the axis names are blanked. This can also be set using the display_axes configuration option.
• Show datum axis tags—Displays datum axis names. This can also be set using the display_axis_tags configuration option.
• Show datum points—Displays datum points and their names. This can also be set using the datum_point_display configuration option.
• Show point symbol as—Displays datum points and their names. Use the list box to select the type of symbol you want to use to designate a point. The options are Cross, Dot, Circle, Triangle, and Square. This can also be set using the display_point_symbol configuration option.
• Show datum point tags—Displays datum point names. This can also be set using the display_point_tags configuration option.
• Show datum coordinate system—Displays coordinate systems and their names. This can also be set using the display_coord_sys configuration option.
• Show coordinate system tags—Displays coordinate system names. This can also be set using the display_coord_sys_tags configuration option .
• Show Images—Displays the images.