To Save Model Tree Settings

Fundamentals > Working with the Model > Model Tree > Basic Model Tree > Saving Model Tree Information > To Save Model Tree Settings

You can save your Model Tree setup and apply it to other models. With more than one assembly, part or drawing open in your session, do the following:

1. In the Model Tree navigator click

and then click Apply Settings from Window. The Change Config Settings dialog box opens.

2. Select the appropriate model from the list.

3. Click Apply > OK.

4. To save these settings to a file, click

and then click Save Settings File on the list. The Save Model Tree Configuration dialog box opens.

5. Accept the default file name, that is, tree.cfg, or type a new name.

6. Click Save.