Fundamentals > Creo Parametric User Interface > The View Tab > Cross Sections > Modifying Cross Sections > To Edit Cross Section Hatching
  
To Edit Cross Section Hatching
1. Right-click a cross section on the Model Tree and click Edit Hatching. TheEdit Hatching dialog box opens.
2. If you are editing an assembly cross section, then select the parts to edit the section hatch pattern. The selected parts are placed in the collector.
3. Select one of the following options:
Do not hatch — Removes the hatch pattern for the selected items.
Use a solid fill — Uses a solid fill in place of a hatch pattern for the selected items. When you select Use a solid fill the color button becomes available. Select a color from the color palette.
Use hatch from the part — Uses the hatch pattern assigned to the material for the selected items.
Use hatch from the library — Uses hatch pattern from the library for the selected items.
When you select Use hatch from the library, Hatch patterns becomes available. Set the filter and select a hatch pattern from the list.
 
* You can select ANSI standard, ISO standard, or user defined hatch patterns from the hatch library. When you select Legacy pattern, the legacy patterns are displayed in the Hatch Patterns list box.
4. To edit the selected hatch pattern, set the following attributes.
Angle — Specify an angle to orient the hatch pattern. The angle is measured relative to the initial orientation of the hatch pattern.
Scale — Specify a value to size the hatch pattern.
— Click to double the size of the hatch pattern.
— Click to halve the size of the hatch pattern.
— Click to open the color palette and select a color for the hatch pattern.
If you click Use Hatch Pattern Colors in the color palette, the color changes to the color of the hatch pattern assigned to the material.
5. Click Apply. The modified hatch pattern is applied to the surface of the cross section on the selected items. The settings are stored in the model and are available when you open the model in another session.