Fundamentals > User Interface Basics > Chains and Surface Sets > Surface Sets > To Construct a Quilt Surface Set
  
To Construct a Quilt Surface Set
 
The active part must contain one or more quilt to construct a Quilt surface set.
If you constructing a Quilt surface set while working in a tool, activate the surfaces collector and follow step 2. through step 4.
1. Select a feature from the model. Creo Parametric highlights the feature.
2. Query each feature and locate a quilt. Notice that you can also use the Quilts filter to easily locate quilts.
3. Select a quilt. Creo Parametric adds the selected quilt surface to the selection set. If you are working outside of a tool, the Selected Items area indicates the selection and the Selected Items dialog box contains the quilt reference. If you are working from inside a tool, the active collector contains the Quilt surface set and the Quilt Surfaces label appears on the model.
4. If you want to add additional quilts to the selection set, press CTRL and repeat step 1. through step 3. Note that most tools require that the selected surfaces belong to the same solid part geometry or quilt.
5. Open a feature tool. Creo Parametric constructs the Quilt surface set, and the surfaces collector contains the Quilt surface set. The Quilt Surfaces label appears on the model.
 
Tip: You can place your pointer over an item and right-click, or use Next and Previous from the shortcut menu to query each feature. You can also use the Pick From List to select features.