To Set Notification Center Options
1. Click
File >
Options The
Creo Parametric Options dialog box opens.
2. Click Notification Center. The Set options for Notification Center page opens.
|  You can also click in the Notifications alert that opens at the bottom of the Main Window or in the Notification Center. |
3. The default type of notification shows in the box. To change it, click the arrow and select an option from the list.
◦ Do not show—Does not show this type of notification in the Model Tree or the Notification Center. The system ignores this type of notification.
◦ Warning—Shows warnings (yellow triangle) for models with notifications in the Model Tree and the Notification Center.
◦ Warning with message—Shows warnings (yellow triangle) for models with notifications in the Model Tree and the Notification Center and a message is shown on regeneration.
◦ Error—Shows notifications as an error (red circle) in the Model Tree and the Notification Center.
4. Modify Regeneration notifications options:
Regeneration Failed and Missing Model notifications are on by default and cannot be changed. These are the most significant notifications and cannot be turned off.
◦ Circular references (nmgr_circular_references)—Shows notifications when there are circular references in the top-level assembly.
◦ Outdated Mass Properties (nmgr_outdated_mp)—Shows notifications for mass properties that need to be recalculated.
◦ Outdated Model in simplified representation (nmgr_outdated_model_graphics)—Shows notifications when a model’s graphics were changed.
5. Modify Reference notifications options:
◦ Outdated model (nmgr_outdated_pdm)—Shows notifications for models that are not up-to-date with the most recent PDM version of the model.
◦ Outdated placement or feature (nmgr_reference_changed)—Shows notifications for components or features that are not guaranteed to be up to date.
◦ Reference not in session (nmgr_reference_changed)—Shows notifications for models or features with references that are not in session.
◦ Generic model failed (nmgr_gen_model_issues)—Shows notifications when the generic model is retrieved, but cannot be regenerated.
◦ Reference model failed (nmgr_ref_model_issues)—Shows notifications when a reference model failed regeneration. This is relevant mainly for Data Sharing features.
6. Modify Applications and 3rd party notifications options:
◦ Outdated embedded PTC Mathcad worksheet (nmgr_outdated_mathcad)—Shows notifications for models containing Mathcad sheets with values different from the values in Creo Parametric. Update the parameters in the embedded worksheet in PTC Mathcad Prime.
◦ Outdated pipe solid (nmgr_outdated_pipe_solids)—Shows notifications when pipe solids are not up-to-date with the recent Piping application data.
◦ Import validation error (nmgr_import_valid_failure)—Shows notification errors when importing a model and the validation fails the checks of the Validation Tool. This is dependent on the setup for each check in the Validation Tool.
◦ Import validation warning (nmgr_import_valid_issues)—Shows notification warnings when importing a model and the validation passes the checks within the accepted tolerance. This is dependent on the setup for each check in the Validation Tool.
◦ Outdated non-native model (nmgr_outdated_non-native)—Shows notifications for models that were not created in Creo Parametric and are not up-to-date with the source model.
◦ Placement modified in Creo Direct (nmgr_modified_in_dma)—Shows notifications when components were repositioned in Creo Direct. You must restore parametric behavior to the model before you can update or modify components and features with this notification.
◦ Affected by Creo Direct (nmgr_affected_by_dma)—Shows notifications for components or features that were affected by modifications made in Creo Direct.
◦ Pending Acceptance (nmgr_pending_dma)—Shows models that were modified in Creo Direct and not initially retrieved. You can accept or reject the changes in the View Changes dialog box in Creo Parametric.
◦ Model is disconnected (nmgr_model_in_discon_state)—Shows notifications when a mechanism connect operation fails during regeneration.
◦ Annotations failure (nmgr_failed_annotation)—Shows notifications for failed annotations.
◦ Annotations with missing references (nmgr_annotation_warning)—Shows notifications for annotation features with missing references.
◦ DRF coordinate system failure (nmgr_failed_drf_csys)—Shows notifications for a failed Datum Reference Frame (DRF) coordinate system.
◦ Sensor Not Connected (nmgr_disconnected_sensor)—Shows notifications when not all parameters of a sensor are connected to a parameter or dimension in the assembly or component.
◦ Sensor Data Ready (nmgr_server_data_replay)—Shows notifications when sensor data has downloaded from the server.
7. Modify Behavior options (nmgr_toaster_bhvr):
◦ Active Notification Pop-Up behavior—Choose an option for displaying notifications:
▪ Do not show—Do not show the Notifications message when there are new notifications on regeneration.
▪ Show and stay—Show the Notifications message when there are new notifications on regeneration.
▪ Show and dissolve—Show and fade out the Notifications message when there are new notifications on regeneration.
8. To restore all defaults, click Restore Defaults.