ECAD > Working With ECAD Assemblies > Setting Up Board Design > To Customize the Board Environment
  
To Customize the Board Environment
You can also set a configuration option for each setting instead of using the Creo Parametric Options dialog box.
1. Click File > Options. The Creo Parametric Options dialog box opens.
2. Click Board. The Board area opens.
3. To set directory paths for board-specific libraries, type a path name in the relevant box, or click Browse to browse to a library folder.
4. To use board parameters or the Preferences dialog box to control the default values of tool settings, click the Associate tool settings check box.
5. To define if bends are automatically added to geometry with sharp edges when creating board segments, click or clear the Add bends on sharp edges check box.
6. To show or hide bend notes for subsequent sessions, click or clear the Show bend notes check box.
7. To customize the bend note symbols or to change the order of the bend note elements, type a different value in the respective box.
 
* To return to the default symbols for bend notes or to the default order of bend note elements, type default in the relevant box.
8. Click OK to apply the new settings.