To Create a Cut
1. Click
Model >
Extrude. The
Extrude tab opens.
2. Make sure that
for removing material is selected.
3. Click Placement. The Placement tab opens.
◦ To edit an existing sketch, click Unlink to break the association with the sketch. An internal sketch is created using a copy of the sketch. Edit the sketch.
◦ When a sketch does not exist, click Define and set references. Create a sketch.
4. Click Options. The Options tab opens. Select a Depth option and a value for each side, if required.
5. To create a board segment cut, click
and select the type of cut to create. To create a solid cut, make sure that
is not selected.
6. To thicken the sketch, click
and specify a value.
7. To flip the depth direction to the other side of the sketch plane, click
.
8. Click
.