To Create a Tie Wrap
1. Click
Tie Wrap.
2. At the prompt, type a new tie wrap feature name.
3. Select a location or point on the segment of the cable to use as a center for the tie wrap. The selected segment of the cable is highlighted. The dimension that locates the tie wrap is created automatically from the start of the cable portion, and all other dimension values are assigned.
◦ If a location is chosen, the tie wrap wraps around all cables at that location.
◦ If a point along a segment portion is chosen, only the selected item is wrapped by the tie wrap.
The default tie wrap dimension values are assigned automatically as follows:
◦ THICK—cable thickness / 4.0
◦ WIDTH—cable thickness / 4.0
◦ LENGTH—cable thickness * pi
|  The tie wrap length is not used to calculate the tie wrap diameter. |