To Change the Orientation of an Angular Dimension
To change the orientation of an angular dimension:
1. Select the angular dimension for which you want to change the orientation. The Dimension ribbon tab becomes active.
2. Click Orientation, and select one of the following orientation type from the list:
◦ Inside Angle — The dimension appears with the lowest angular value between the selected references.
◦ Outside Angle — The dimension appears with the largest angular value between the selected references.
◦ Supplementary Angle 1 — The dimension appears with first complementary angular value between the selected references.
◦ Supplementary Angle 2 — The dimension appears with second complementary angular value between the selected references.
3. Click in the graphics area to confirm the reorientation of the selected angular dimension.
|
|
 You can select only one angular dimension to change the orientation. If you select multiple angular dimensions, the orientation option is not available for selection. |