To Modify an Auxiliary View
1. Open a drawing with one or more auxiliary views.
2. Double-click an auxiliary view. Alternatively, select an auxiliary view, right-click, and click Properties on the shortcut menu. The Drawing View dialog box opens with the View Type category selected by default.
3. If required, modify the view name in the View name box.
4. Under Type, Auxiliary is selected by default. Do not change this selection.
5. In the Auxiliary view properties section, select the projection reference and the projection arrow type as follows:
◦ Based on the auxiliary view that you have selected, the name and the projection reference on the parent view are displayed. You cannot modify them.
◦ Under Projection Arrows, select None, Single, or Double to define the projection arrow type for the selected view. By default, projection arrows are not created.
6. To continue defining other attributes for the drawing view, click Apply and select the appropriate category in the dialog box. If you have completely defined the drawing view, click OK.