Detailed Drawings > Reviewing a Drawing > Measuring in Drawings > To Measure Model Geometry in a Drawing
  
To Measure Model Geometry in a Drawing
1. Open a drawing.
2. Use the following commands in the Measure group of the Analysis tab:
◦ Angle—Opens the Angle dialog box. Measures the angle between two draft entities.
◦ Distance—Opens the Distance dialog box. Measures the distance between two draft entities.
◦ Length—Opens the Length dialog box. Measures the length of a curve or an edge.
◦ Area—Opens the Area dialog box. Measures the area of the selected surface, quilt, facets, or an entire drawing model.
◦ Diameter—Opens the Diameter dialog box. Measures the diameter of a surface.
◦ Transform—Opens the Transform dialog box. It displays the transformation matrix between two coordinate systems as a note pointing to the second coordinate system.