Detailed Drawings > Defining the Drawing Layout > Working with Model Views > Inserting New Views > To Insert a Flat Ply View
  
To Insert a Flat Ply View
 
* The Flat Ply command is not available for full body plies.
1. Create or open a drawing of a composite model.
2. Click Layout and click the arrow next to the Model Views group.
3. Click Flat Ply.
4. Select the center for the view on the drawing.
5. Select the ply you want to show in the view from a name list.
6. Orient the view of the ply. You can only rotate it about the Z-axis (normal to screen).
7. Click Done Orient when finished.