To Decrease Spline Points Automatically
1. Select the spline, and then right-click to display the shortcut menu.
2. Click
Sketch and then click the arrow next to
Spline.
3. Click
Edit Spline. The
MOD SPLINE and
MOVE PNTS menus appear in the Menu Manager.
4. Click MOD SPLINE > Sparse.
5. Type a deviation value to redraw the spline with fewer points. This value must be a positive number. The system highlights the spline and tells you how many points it is going to remove.
6. To accept the changed spline, choose Accept; to reject it, choose Reject and type a different deviation value. (For each spline, you might need to try several different deviation values before achieving the desired result.)