Detailed Drawings > Annotating the Drawing > Dimensioning the Model > Working with Witness Lines > To Create a Break in a Witness Line
  
To Create a Break in a Witness Line
1. On the Annotate tab, click Break. You are prompted to select the line to break.
2. Select the line. The BREAK TYPE menu manager opens.
3. Check Parametric or Simple. A parametric break prompts you to choose a witness line or snap line to break around. You are also prompted for a break size. If you move the line you selected, the break moves with it.
A simple break lets you insert a break with one click on the line to be broken. You can adjust its size, but it is not associated with any other entity.
4. If you are inserting a parametric break, select the intersecting line. Select a break size to complete the break. You can select another witness line to break, or middle click to exit the command.
If you are inserting a simple break, click the point on the witness line to create the break. Use the line "handles" to size the break.
 
* You cannot break a radial or diameter dimension of an arc or circle because what you see is not a witness line, but the extension of a dimension arrow.