Detailed Drawings > Annotating the Drawing > Dimensioning the Model > Formatting Dimension Display > Working with Dimensional Tolerances > To Change the Tolerance Table Reference
  
To Change the Tolerance Table Reference
1. Click File > Prepare > Drawing Properties.
2. Click change against Tolerance. The Menu Manager opens.
3. Click Tol Tables. The TOL TBL ACT menu displays these commands:
◦ Modify Value—Displays the tables in the Tol Tables menu.
◦ Retrieve—Retrieves a set of tables into the model.
◦ Save—Saves the tolerance table.
◦ Show—Displays the tolerance table, as shown next.
TABLE_TYPE
GENERAL
TABLE_NAME
DEFAULTS
TABLE_UNIT
MILLIMETER
RANGE_UNIT
MILLIMETER
DESCRIPTION
0.05–3
FINE
0.05–
MEDIUM
0.1
COARSE
0.2
VERY COARSE
0.5
4. Do one of the following:
◦ Click Modify Value, select the table by choosing General Dims or Broken Edges, and select the dimensions.
◦ Click Holes or Shafts; then type the table name and class number.