Export Profile Options
|
Values
|
Description
|
Corresponding Configuration Options
|
Model preferences
|
|||
Export assembly as
|
Flat*, One level, All levels, All parts
|
Specifies the file structure of the exported assembly models.
|
iges_out_assembly_default_mode
|
Include
|
|||
Datums
|
The export includes datum points, curves, planes, axes as line segments, and coordinate systems.
|
intf3d_out_datums_by_default
|
|
Hidden entities
|
Is selected by default.
|
The export includes hidden entities.
|
intf_out_blanked_entities
|
Cable surfaces
|
The export includes cable surface geometry.
|
||
Parameters
|
Is selected by default.
|
The export includes entity-level parameters.
|
intf3d_out_parameters
|
Advanced > Include
|
|||
Entity names derived from IDs
|
Exports entities that are assigned auto-generated names based on their IDs.
|
intf_out_assign_names
|
|
Over-ride with explicit user defined names
|
Is available when Entity names derived from IDs is selected.
|
Exports entities assigned with user-defined names instead of the auto-generated names based on their IDs.
|
|
Advanced > Geometry and entity preferences
|
|||
Export solids and quilts as
|
Surfaces* As Is, Quilts, Wireframe, Surfaces and Wireframe
|
Specifies the geometric representation of the exported solids and quilts.
|
|
Export all surfaces as free-form
|
Is selected by default when the iges_out_all_srfs_as configuration option is set to 128 (b-splines) or 114 (splines).
|
Surfaces are exported as free-form surfaces.
|
iges_out_all_srfs_as
|
Free-form surface type
|
b-spline*, spline
Select Export all surfaces as free-form to set Free-form surface type as spline.
|
Specifies the surface type as b-spline or spline.
|
|
Convert spline surfaces to b-spline surfaces
|
Is not available when Export all surfaces as free-form is selected.
|
Exports spline surfaces as b-spline surfaces.
|
iges_out_spl_srfs_as_128
|
Match geometric to topological normals
|
Forces the geometrical normals of the exported free-form surfaces to point in a consistent direction so that they match the topological normals.
|
intf3d_out_force_surf_normals
|
|
Maximum surface deviation
|
–1.000000
|
Specifies the accuracy needed for surface approximation when converting surfaces to free-form surfaces.
|
intf3d_out_surface_deviation
|
Raise free-form surface degree
|
Raises the surface degree for approximating free-form surfaces as bezier patches.
|
intf_out_as_bezier
|
|
Maximum free-form surface degree
|
5 to 16 with 16 as the default.
Is available when you select Raise free-form surface degree.
|
The maximum degree that can be used when approximating b-spline surfaces.
|
intf_out_max_bspl_degree
|
Extend surface boundaries
|
Is selected by default.
|
Extends the domains of surfaces until the surfaces intersect.
|
intf3d_out_extend_surface
|
Export face as
|
Trimmed*, Bounded
Is available only when Export solids and quilts as is set to Surfaces, Wireframe, Surfaces and Wireframe.
|
Specifies the representation of the exported faces.
|
iges_out_trm_srfs_as_143
|
XYZ trimming curves
|
Is selected by default.
This option is not available when Export face as is set as Bounded.
|
Includes XYZ representations of the surface trimming curves when faces are exported as trimmed representations.
|
iges_out_trim_xyz
|
Export all curves as b-spline
|
Exports trimming and datum curves as b-splines.
|
iges_out_ent_as_bspline
|
|
Convert spline curves to b-spline curves
|
Is selected by default. This option is not available when Export all curves as b-spline is selected.
|
Exports spline curves as b-spline curves.
|
iges_out_spl_crvs_as_126
|
Advanced > Layer preferences
|
|||
Generate automatic layer IDs
|
Automatically assigns layer IDs to layers without explicitly defined IDs.
|
intf_out_auto_layer_ids
|
|
Map numeric layer names to layer IDs
|
Is selected by default.
|
Uses the numeric names as the layer IDs when layers have numeric names.
|
intf3d_out_use_num_names
|