Interface > Working with Digitized Input > To Configure the Tablet
  
To Configure the Tablet
After the workstation is configured, you can use the bank of lights, numbers, and letters at the top of the tablet to configure it.
1. Switch on the tablet.
2. Select Config on the tablet using the tablet puck.
3. As you move the puck crosshairs across the letters and numbers, the power light goes on and off. When the power light is on, this represents a 1. When the power light is off, this represents 0.
4. Click A under the Bank options on the tablet. Configure the tablet for Bank A options using the settings shown in the following table.
Bank A Configuration
Button
1
2
3
4
5
6
7
8
9
Setting
1
1
0
1
0
1
0
0
1
Power Light
on
on
off
on
off
on
off
off
on
Button
10
11
12
13
14
15
16
17
18
Setting
1
0
1
0
1
1
1
0
1
Power Light
on
off
on
off
on
on
on
off
on
5. Click B under the Bank options on the tablet. Configure the tablet for Bank B options using the settings shown in the following table.
Bank B Configuration
Button
1
2
3
4
5
6
7
8
9
Setting
0
0
1
1
 
 
0
0
0
Power Light
off
off
on
on
 
 
off
off
off
Button
10
11
12
13
14
15
16
17
18
Setting
0
0
0
0
0
0
0
0
0
Power Light
off
off
off
off
off
off
off
off
off
6. When you have finished, store the configuration. If you save it to number 1, it is automatically configured when you turn on the tablet. If you store it to another number, restore the configuration before using the tablet with the Creo application.