Координатно-измерительные машины (КИМ) > Workcells > To Create a Work Center (Workcell)
  
To Create a Work Center (Workcell)
1. Click Inspect > CMM.
Alternatively, click Inspect > Operation to open the Operation tab. Click Setup. The CMM Work Center dialog box opens.
2. The CMM Work Center dialog box displays the default settings for the machine name, type, and parameters. You can click at this point to create a machine tool with default name and parameters, and no probes associated with it.
3. To change the machine name, type the new name in the Name text box.
4. To change the machine tool parameters, use the tabbed pages located in the lower portion of the dialog box.
5. To set up the probes for the machine, click Probes in the Probes tab. You can also set up the probes later by clicking Inspect > Probes.
6. Click to finalize the workcell creation and close the dialog box.
If you click without specifying any details for the workcell, CMM creates the workcell with the default name (CMM01, CMM02, etc.), a default set of parameters, and no probes associated with it. All the probes that you subsequently use for the Measure steps performed on this workcell will automatically be associated with this workcell.