To Remove Jogs
To remove a jog from a witness line:
a. Select one or more dimensions.
b. Place the pointer over a jog dragger and right-click.
c. Click Remove Jog on the shortcut menu. The jog dragger and its associated jog are removed. Jog dragger are handles at the start and end points of the jog.
To remove all jogs from a single witness line:
a. Select a dimension.
b. Move the pointer close to a witness line from which you want to remove a jog till the pointer changes to .
c. Right-click and click Remove Jogs on the shortcut menu. All jogs on the witness line are removed.
To remove all jogs from one or more witness lines:
a. Select one or more dimensions.
b. Right-click outside the model in the graphics window.
c. Click Remove All Jogs on the shortcut menu. All jogs on the witness lines of all selected dimensions are removed.
To remove jogs dynamically, drag the jog draggers at the jog points to overlap each other.
* 
You cannot move the jog dragger beyond the clip witness line dragger or the dimension leader line.
Was this helpful?