To Intersect Sketches or Surfaces
1. Perform one of the following actions, depending on the items to intersect:
◦ Surfaces, quilts, bodies, datum planes, solid faces
Perform one of the following actions:
▪ Click > , under
Type, click
Surface, and then select the first surface, quilt, body, datum plane, or solid face to intersect.
▪ Select the first surface, quilt, body, datum plane, or solid face to intersect, click > , and under
Type, click
Surface.
◦ Sketches
Perform one of the following actions:
▪ Click > , under
Type, click
Sketch, and then select the first sketch to intersect.
▪ Select the first sketch to intersect, click > , and under
Type, click
Sketch.
2. Hold down the CTRL key while you select the second sketch or surface to intersect.
3. Click
OK.