About the Trim User Interface
The Trim tab consists of commands, tabs, and shortcut menus. Click > to open the Trim tab.
Commands
• Type
◦ Quilt—Trims a quilt.
◦ Curve—Trims a curve.
• Settings
◦ Trimming object collector:
▪ Collects a surface, curve or edge chain, or plane to trim a quilt.
▪ Collects a point, curve, or plane to trim a curve.
◦ —Performs one of two mutually exclusive operations:
▪ Switches the side of the trimmed object to keep, cycling between one side, the other side, or both sides, when Thicken trim is not selected.
▪ Selects the side to which to apply a thickness value, when Thicken trim is selected.
◦ Silhouette Trim—Trims a quilt at the silhouette of the projection of the trimming object in a normal direction onto the quilt. Available when the trimmed object is a curved quilt, and the trimming object is planar.
Tabs
• References
◦ Trimmed quilt collector—Collects a quilt to trim.
▪ Swap—Changes which side of the resulting quilt retains the quilt ID. Available when you keep both sides of the trimmed quilt.
◦ Trimmed curve collector—Selects a curve to trim.
◦ Trimming object:
▪ Collects a surface, curve or edge chain, or plane to trim a quilt.
▪ Collects a point, curve, or plane to trim a curve.
▪ Details—Opens the Chain dialog box so you can modify the chain set properties.
• Options—Specifies trim thickness dimensions, surfaces to exclude from thicken trim, and controlled fitting requirements for surfaces:
◦ Keep trimming surface check box—Keeps the trimming surface.
◦ Thicken trim check box—Trims the quilt using a thickened trimming quilt. Available when both the trimmed object and the trimming object are quilts.
▪ Value box—Sets the thickness value.
▪ Offset options:
▪ Normal to Surface—Thickens the surface in a direction normal to surface.
▪ Exclude Surface collector—Lists surfaces from the original quilt excluded from the thicken trim operation.
▪ Auto—Automatically excludes surfaces from the thicken trim so the trim can be completed successfully.
▪ Automatic Fit—Automatically determines the scaling coordinate system and fit along all three axes.
▪ Controlled Fit—Thickens the surface by a specific scaling coordinate system and controlled fitting motion. Allows you to determine the offset direction.
▪ Coordinate system—Displays a coordinate system that you use for scaling and fit.
▪ Allow translationX, Y, and Z check boxes—Allows translation along the selected axes.
• Properties
◦ Name box—Sets a name for a feature.
◦ —Displays detailed component information in a browser.
Shortcut Menus
Right-click the graphics window to access shortcut menu commands:
• Trimmed Quilt—Activates the Trimmed quilt collector to specify the quilt to be trimmed.
• Trimming Object—Activates the Trimming Object collector to specify the object used as the trimmer.
• Exclude Surfaces—Activates the Exclude Surface collector to exclude selected surface from a thicken trim operation.
• Clear—Clears the active collector.
• Flip—Specifies the direction of the arrow to indicate the portion of the surface to keep or where to apply the thickness value.
• Thin Trim—Activates the thicken options. These options are only available when trimming a quilt.
Right-click the direction arrow to access shortcut menu commands:
• Flip—Redirects the direction of the arrow to indicate the side of the surface to keep after trimming.
• Both Sides—Adds another arrow and keeps both sides of the trimmed surface or applies the thickness value to both sides.