|
You can also type a new parameter or select a most recently used one using the Rho box on the Round tab or the Sets tab.
|
|
You can also type a new value in the distance value box or select a most recently used value from the list in the radius table (D column) located on the Sets tab. The same method applies to the distance value box on the Round tab. However, this box is available only for constant rounds.
|
• You can easily convert a conic round to a D1 x D2 conic round by placing your pointer over the radius of the conic round, right-clicking, and selecting Independent on the shortcut menu. If you click this command again, the system restores the round to its previous state. Note that you can only convert constant round types. • If you are using a chain as a reference and you want to modify it, click Details on the Sets tab and use the Chain dialog box. • To quickly define a distance or conic parameter, double-click the value in the graphics window and type a new value and press ENTER or select a most recently used value from the list. • You can always select Default in a most recently used list to enable the system to determine the value. |