To Mirror All the Geometry in a Part
1. Perform one of the following actions:
◦ To mirror all the geometry in the part, select the part name at the top of the Model Tree.
◦ To mirror all the geometry and features in the part:
1. Select the part name at the top of the Model Tree.
2. Press and hold down SHIFT while you select the last feature in the Model Tree, so that all the features are also selected.
2. Click > 
Mirror. The Mirror tab opens.
Mirror. The Mirror tab opens.3. Select a planar reference to mirror across. You can select a datum plane, intent datum plane, or planar surface.
 | You can redefine the mirror plane by clicking a planar reference to mirror across. You can select a datum plane, intent datum plane, or planar surface. |
4. To define the bodies to which the geometry is added, click the Body Options tab and select an option:
◦ To add the mirrored solid geometry from each body to the same body that it was copied from, select Original bodies.
◦ To add the mirrored solid geometry from each body to a new body, select New bodies.
| | If the model contains consumed bodies, then all features and geometry that are mirrored are added as new bodies. |
5. Click 
OK.
OK.