Surfacing > Warp > Stretch Operation > About the Stretch User Interface
About the Stretch User Interface
The Stretch tab consists of commands, tabs, and shortcut menus. Click Warp > to open the Stretch tab.
Commands
Stretch
—Aligns the axis in the direction to stretch the geometry.
—Reverses the direction of the axis.
Scale box—Scales the geometry in reference to the selected direction reference.
Tabs
References
Geometry collector—Displays the bodies or the group of curves, quilts, or facet geometry to stretch.
Hide Original check box—Hides the geometry of the original entity in the warp.
Copy Original check box—Copies the original entity in the warp after you have completed it.
Facet Preview check box—Displays a preview of the warped geometry within the feature. Facet Preview is unavailable if the selection consists only of facet geometry, curves, or both.
Facet Preview slider—Increases or decreases the preview quality.
Facet Preview box—Specifies a preview quality value from 0 to 100.
Direction collector—Displays the coordinate system or reference plane selected for the warp.
List
Warp list—Lists each warp procedure within the current Warp feature.
—Moves the insertion arrow to the beginning of the list.
—Moves the insertion point back by one item.
—Moves the insertion point forward by one item.
—Moves the insertion arrow to the end of the list.
—Deletes the selected warp procedure from the list.
Marquee
References collector—Sets initial marquee size and location when you select geometry, bodies, datum planes, or datum points.
Active Axis
Sets the Start and End of the marquee along the axis as a percentage of the original marquee (when Marquee Size method is Proportional).
Sets the Start and Length of the marquee along the axis as a value (when Marquee Size method is Absolute).
Sets the Start Offset and End Offset of a marquee as a value offset from the marquee start or end (when Marquee Size method is Offset).
Marquee Size list—Sets the method used to determine marquee size.
Absolute—Sets the marquee size using absolute dimensions.
Offset—Sets the marquee size using distance from the marquee start or end.
Proportional—Sets the marquee size as a percentage relative to the original.
Reset—Resets the marquee to the default size and location.
Properties
Name box—Sets a name for a Warp feature.
—Displays detailed component information in a browser.
Shortcut Menus
Right-click the graphics window to access shortcut menu commands.
Geometry Collector—Activates the Geometry collector.
Direction Collector—Activates the Direction collector.
Marquee Collector—Activates the Marquee collector.
Deactivate Collector—Dectivates the selected collector.
Clear—Removes data from the selected collector.
Use Boundary Tangents—Maintains tighter tangency control at boundaries.
Next Axis—Aligns the axis in the next direction.
Reverse Axis—Reverses the direction of the axis.
Transform—Activates the Transform warp type.
Warp—Activates the Warp warp type.
Spine—Activates the Spine warp type.
Stretch—Activates the Stretch warp type.
Bend—Activates the Bend warp type.
Twist—Activates the Twist warp type.
Sculpt—Activates the Sculpt warp type.