To Copy or Delete a Bend Table
1. Click > > . The Model Properties dialog box opens.
2. Under Sheetmetal, click change in the Bend Allowance line. The Sheetmetal Preferences dialog box opens.
3. Click Bend Allowance. The Bend Allowance area displays.
4. Click Part Bend Allowance Tables. The Part Bend Allowance Tables dialog box opens.
5. To copy a bend table to the part, select the bend table and click
, or right-click and choose
Copy.
6. To delete a bend table from a part, click
, or right-click and choose
Delete. The bend table is deleted from the part but still exists in the directory.
7. Click OK.