To Create a Datum Curve through Points that Lie on a Surface
To create a curve through points on a surface, all the points defined in the curve must use the spline connection type.
1. Click > > > 
Curve through Points. The Curve through Points tab opens.
Curve through Points. The Curve through Points tab opens. | You can also select points to define the curve first, and then open the Curve through Points tab. |
2. To select points to define the curve, click the Placement tab, and perform these actions:
a. To add the first point to the curve definition, click the Point collector, and in the graphics window, select an existing point, vertex, or curve end.
b. To add additional points to the curve definition, click Add Point, click the Point collector, and in the graphics window, select a point, vertex, or curve end.
3. To create a curve that lies on a surface, on the Placement tab, perform these actions:
a. Select the Place curve on surface check box.
b. To select the surface on which to place the curve, click the Surface collector, and select a single surface, quilt, or body.
4. Click OK 
.
.