Detailed Drawings > Detailed Drawings > Defining the Drawing Layout > Working with Crosshatch Patterns > To Modify Component Crosshatches of a 2D Cross Section
To Modify Component Crosshatches of a 2D Cross Section
Use the following procedure to show or erase crosshatches associated with components of an assembly or a part 2D cross section:
1. Open a part or an assembly drawing.
2. Select one or more cross-sections.
3. Double-click or right-click and click Properties on the shortcut menu. The MOD XHATCH menu appears on the Menu Manager.
4. Click X-Component and Pick to select one or more components.
5. Click Erase to erase crosshatches of the selected components or click Show to display erased crosshatches for the erased components.
6. Click Done to close the MOD XHATCH menu.
* 
You can also use the Erase and Show commands on the shortcut menu to erase or show crosshatches, respectively, for the selected components.