Token name | Condition | Value taken from |
BASIC_DIAM | Hole file | |
BOTCSINK_ANGLE | Exit countersink | Exit countersink angle |
BOTCSINK_DIAM | Exit countersink | Exit countersink diameter |
BOTCSINKANGLE | Hole file | |
BOTCSINKDIAM | Hole file | |
CBORE_DEPTH | Counterbore | Counterbore depth |
CBORE_DIAMETER | Counterbore | Counterbore diameter |
CBOREDEPTH | Hole file | |
CBOREDIAM | Hole file | |
CLEAR_DR_CLOSE | Hole file | |
CLEAR_DR_FREE | Hole file | |
CLEAR_DR_MED | Hole file | |
CLOSE_DEC | Hole file | |
CSINK_ANGLE | Countersink | Countersink angle |
CSINK_DIAMETER | Countersink | Countersink diameter |
CSINKANGLE | Hole file | |
CSINKDIAM | Hole file | |
DIAMETER | Drill diameter | |
DRILL_DEPTH | • Drill depth for tapped, tapered, or drilled holes of variable depth • THRU for all other holes | |
DRILL_DIAMETER | Drill diameter | |
DRILL_POINT_ANGLE | Tapped or drilled holes of blind depth | Drill angle |
FASTENER_ID | Hole file | |
FREE_DEC | Hole file | |
HANDTIGHT_LENGTH | Hole file | |
MAJOR_DIAM_END | Hole file | |
MAJOR_DIAM_START | Hole file | |
MED_DEC | Hole file | |
METRIC | • YES for models that use metric units • NO for models that do not use metric units | |
METRIC_SIZE | Screw size | |
MINOR_DIAM_END | Hole file | |
MINOR_DIAM_START | Hole file | |
NUMBER_SIZE | Drill number | |
PATTERN_NO | Feature count in the pattern | |
PERCENT_THREAD | Hole file | |
PIPE_OD | Hole file | |
PITCH | • Pitch for threaded holes • 0.0 for non-threaded holes | |
PITCH_DIAM_END | Hole file | |
PITCH_DIAM_START | Hole file | |
SCREW_SIZE | Screw size | |
STD_HOLE_TYPE | Tap, tapered, drill, or clear | |
TAP_DEC | Hole file | |
TAP_DR | Hole file | |
TAPER_ANGLE | Hole file | |
THREAD | Hole file | |
THREAD_ANGLE | Hole file | |
THREAD_CLASS | Class | |
THREAD_DEPTH | Tapped or tapered | • Thread depth for variable thread holes • THRU for all other holes |
THREAD_DIAMETER | Threaded | • MAJOR_START_DIA for tapered holes • Thread diameter for tapped holes |
THREAD_HEIGHT | Hole file | |
THREAD_LENGTH | • Thread length • THRU for non-variable threaded hole | |
THREAD_NAME | Thread name | |
THREAD_SERIES | Thread series | |
THREADS_PER_INCH | • TPI for threaded holes • 0.0 for non-threaded holes | |
TOOTH_RADIUS | Hole file | |
VAR_DEPTH | Tapped, tapered, or drilled | Down arrow symbol for variable depth holes |
VAR_THREAD | Tapped or tapered | Down arrow symbol for variable thread holes |
WASHOUT_ANGLE | Hole file | |
WRENCHING_LENGTH | Hole file |