ここでは、Creo Simulate に関連するトピックについての参考文献一覧を示します。以下のセクションに分けて参考文献を示します。

Bathe, Klaus-Jurgen.Finite Element Procedures in Engineering Analysis. Englewood Cliffs, NJ: Prentice-Hall, 1982.

Bonet, Javier, and Richard D. Wood. Nonlinear Continuum Mechanics for Finite Element Analysis. New York: Cambridge University Press, 1997.

Hughes, Thomas J.R. The Finite Element Method:Linear Static and Dynamic Finite Element Analysis. Englewood Cliffs, NJ: Prentice-Hall, 1987.

Kardestuncer, H., and Norrie, D. H., eds.Finite Element Handbook. New York: McGraw-Hill, 1987.

Zienkiewicz, O.C. The Finite Element Method. New York: McGraw-Hill, 1988.

Baumel, A. and Seeger, T. "Materials Data for Cyclic Loading, Supplement 1." Materials Science Monographs, 61. Pub: Elsavier.

Morrow, J. "Fatigue Design Handbook." Advances in Engineering. Vol. 4. Society of Automotive Engineers, Warrendale, PA. (1968): Sec 3.2, pp 21–29.

Smith, K. N., Watson, P., and Topper, T. H. "A Stress-Strain Function for the Fatigue of Metals." Journal of Materials. Vol. 5, No. 4, (1970): 767–778.

Babuska, I., and Suri, M. "The p- and h-p Versions of the Finite Element Method, an Overview." Computer Methods in Applied Mechanics and Engineering. 80 (1990): 5–26.

Babuska, I., and Szabo, B. "On the Rates of Convergency of the Finite Element Method." International Journal for Numerical Methods in Engineering. 18 (1982): 323–341.

Babuska, I., Szabo, B., and Katz, I. N. "The p-Version of the Finite Element Method." Society for Industrial and Applied Mathematics. (1981): 515–545.

Szabo, B. "Geometric Idealizations in Finite Element Computations." Communications in Applied Numerical Methods. 4 (1988): 393–400.

Szabo, B. "Mesh Design for the p-Version of the Finite Element Method." Computer Methods in Applied Mechanics and Engineering. 55 (1986): 181–197.

Szabo, Barna, and Ivo Babuska.Finite Element Analysis. New York: Wiley, 1991.

Szabo, B., and Sahrmann, G. "Hierarchic Plate and Shell Models Based on p-Extension." International Journal for Numerical Methods in Engineering. 26 (1988): 1855–1881.

Bennett, J.A., and M.E. Botkin. The Optimum Shape. New York:Plenum, 1986.

Haug, Edward J., and Jasbir S. Arora. Applied Optimal Design. New York:Wiley, 1979.

Haug, Edward J., Kyung K. Choi, and Vadim Komkov.Design Sensitivity Analysis of Structural Systems.London:Academic Press, 1986.

Vanderplaats, Garret N. Numerical Optimization Techniques for Engineering Design.New York:McGraw-Hill, 1984.

Wismer, David A., and R. Chatterly. Introduction to Nonlinear Optimization. New York:North-Holland, 1983.

Gere, James M., and Stephen P. Timoshenko. Mechanics of Materials. 第 2 版 Monterey, CA: Brooks/Cole Engineering Division, 1984.

Jones, Robert M. Mechanics of Composite Materials.Washington, D.C.:Scripta Book Company, 1975.

Popov, E. P. Introduction to Mechanics of Solids.Englewood Cliffs, NJ:Prentice-Hall, 1968.

Reddy, J. N. Energy and Variational Method in Applied Mechanics.New York:John Wiley & Sons, 1984.

Shigley, Joseph Edward Mechanical Engineering Design.第 3 版New York:McGraw-Hill, 1977.

Timoshenko, S. P., and J.N. Goodier. Theory of Elasticity. New York:McGraw-Hill, 1970.

Tsai, Stephen W. Composites Design. 第 4 版Dayton, OH: Think Composites, 1988.

Tsai, Stephen W., and H. Thomas Hahn.Introduction to Composite Materials.Westport, CT:Technomic Publishing Co., 1980.

Ugural, A. C. Stresses in Plates and Shells.New York:McGraw-Hill Book Company, 1981.  

Blevins, Robert D. Formulas for Natural Frequency and Mode Shape.New York:Van Nostrand Reinhold Co., 1979.

Roark, Raymond J., and Warren C. Young.Formulas for Stress and Strain.第 5 版New York:McGraw-Hill, 1975.

Section 5.A.4.1.2 of the 2010 ASME Boiler and Pressure Vessel Code, VIII Division 2, Alternative Rules, Rules for Construction of Pressure Vessels.

Holman, J. P. Heat Transfer. 第 6 版New York:McGraw-Hill, 1986.

Incropera, Frank P., and David P. Dewitt.Fundamentals of Heat Transfer.New York:Wiley, 1981.

Kreith, Frank, and Mark S. Bohn.Principles of Heat Transfer.第 4 版New York:Harper & Row, 1986.