匯出設定檔選項
|
數值
|
描述
|
對應組態選項
|
「Parasolid 佈置」(Parasolid schema)
|
SCH_10004*。介於 SCH_3000 與 SCH_13006、SCH_210 與 SCH_1012 之間的值範圍
|
指定要匯出的結構描述。
|
intf3d_parasolid_export_schema
|
「模型偏好設定」(Model preferences)
|
|||
「將組件匯出為」(Export assembly as)
|
「平坦」(Flat)*、「所有級別」(All Levels)
|
指定已匯出組件模型的結構。
|
|
「包括」(Include)
|
|||
「面組」(Quilts)
|
依預設處於選取狀態。
|
匯出包括面組。
|
|
「隱藏圖元」(Hidden entities)
|
依預設處於選取狀態。
|
匯出包括隱藏圖元。
|
intf_out_blanked_entities
|
「纜曲面」(Cable surfaces)
|
匯出包括纜曲面幾何。
|
||
「進階」(Advanced) > 「幾何及圖元偏好設定」(Geometry and entity preferences)
|
|||
「將實體和面組匯出為」(Export solids and quilts as)
|
「依現狀」(As Is)*、「面組」(Quilts)
|
指定所匯出實體和面組的幾何表示。
|
|
「最大曲面偏差」(Maximum surface deviation)
|
–1.000000
|
轉換為自由成型曲面時,指定曲面逼近度的所需精度。
|
intf3d_out_surface_deviation
|
「提高自由成型曲面角度」(Raise free-form surface degree)
|
增大曲面角度,以逼近自由成型曲面作為 bezier 補綴。
|
intf_out_as_bezier
|
|
「最大自由成型曲面角度」(Maximum free-form surface degree)
|
5 至 16,預設值為 16。
當您選取「提高自由成型曲面角度」(Raise free-form surface degree) 時才可用。
|
當逼近 b-雲規線曲面作為 bezier 補綴時,可以使用的最大角度。
|
intf_out_max_bspl_degree
|