Creo Options Modeler > References > PTC Creo Unite > Configuring the Retrieval of non-Creo Models > To Configure the Retrieval of non-Creo Models
  
To Configure the Retrieval of non-Creo Models
1. Create import or open profiles with options that are specific to the CATIA V5, Creo Elements/Direct, SolidWorks, NX, or Autodesk Inventor file formats or edit the existing format-specific import profiles.
2. Click File > Options.
3. Click Data Exchange in the Creo Parametric Options dialog box and make sure that CATIA, Creo Elements/Direct, SolidWorks, NX, and Inventor check boxes under Open by default are selected by default.
4. Browse and select the format-specific import or open profiles that you created or modified for the retrieval of CATIA V5, CATIA V5 CGR, or CATIA V4, Creo Elements/Direct, SolidWorks, NX, or Autodesk Inventor models and designate them as the default profiles for the file open task. They are listed as the default profiles for the corresponding formats in the table under Import and Open Profiles.
 
* The CATIA V5 check box and the import profile that you created for the retrieval of CATIA V5 and CATIA V5 CGR models are also valid for the CATIA V4 .model files.
5. Click OK in the Creo Parametric Options dialog box.