dma > Creo Direct > Designing in the Creo Direct Environment > Working in Part Mode > Working with 3D Geometry > Creating 3D Geometry > Revolved Geometry > Revolve geometry in an active part in an assembly
Revolve geometry in an active part in an assembly
You can create a revolve geometry in an activated part within an assembly by selecting a sketched curve or one or more sketch regions from any part. Use the following steps:
1. In Part mode, select one or more coplanar sketched regions or sketched curves on the part. A Live Toolbar opens.
2. Click on the Live Toolbar. An Options Toolbar appears. Expand the Options Toolbar to open the Floating Dashboard.
3. Use the Floating Dashboard to create revolved geometry.
If multiple instances of the same part exist in the assembly, revolved geometry is created for all the part instances simultaneously. To snap the angular handle of the dragger to a geometric reference during the rotation:
1. Hold down the SHIFT key as you move the dragger.
2. Point to a reference entity.