Creo Expert Moldbase Extension > Creo Expert Moldbase Extension Tools > To Set Accuracy
  
To Set Accuracy
1. Set the following Creo Parametric configuration options:
enable_absolute_accuracy to YES.
accuracy_lower_bound to an appropriate value.
2. Click EMX Assembly > EMX Tools > Set Accuracy to set the accuracy of single components or an entire assembly. The Set Accuracy dialog box opens.
3. Enter a value in the Accuracy box.
4. Select or clear the Absolute or Relative check boxes.
5. Click to select components. The system attempts to set component accuracy to the given value and type.
6. Click Close to close the dialog box.