Creo Expert Moldbase Extension > Setting Up the Project Assembly Structure > To Create a New Subassembly
  
To Create a New Subassembly
You can create a new subassembly in any existing assembly. A subassembly uses the same unit of measure as the top assembly.
1. Click EMX Assembly > Add Subassemblies. The Subassembly dialog box opens.
2. Select the parent assembly.
3. In the Name box, enter a name for the new subassembly, drawing, and report.
4. In the Note box enter a description of the subassembly using up to 256 characters
5. Select the Copy Drawings check box to create a drawing from the selected template.
6. Select the Copy Reports check box to create a report from the selected template.
7. Under Parameter, in the Parameter Name column notice the and symbols:
—Indicates that the current parameter value is linked to the default value.
—Indicates that the current parameter value is not linked to the default value.
To toggle the lock status, click or . You can change or enter a value in the Value column only if Parameter Name is set to .
8. In the Value column, double click a value to make changes.
9. Click OK to create the subassembly and close the dialog box or click Cancel to exit without saving changes.