Creo Expert Moldbase Extension > To Create the Cavity Insert Assembly Cut-Outs
  
To Create the Cavity Insert Assembly Cut-Outs
Use the Cavity Cutout dialog box to define cavity plate cutouts.
1. Click EMX Assembly > Cavity Cutouts. The Cavity dialog box opens.
* 
The insert assembly outline dimensions automatically appear in the Cavity Size boxes and preview window. The preview orientation is the same as that in the Mold Base Definition dialog box preview. Correct initial data appears only if the cavity insert assembly was assembled to the cavity layout pattern. When the values are changed, the old values continue to appear until the insert assembly outline is remeasured in the Classify dialog box.
2. Select cutout definitions:
◦ No cutout—Removes existing cavity insert cuts.
◦ One rectangular cavity cutout—Enter values for the x- or y- offset, radii or corner mouse ears, or both.
◦ Counterbore or Rectangular cutout pattern—One cutout is created for each cavity insert assembly individually. A rectangular cutout can have radii or corner mouse ears.
◦ Workpiece outline cutout—Creates a solid surface copy in all workpiece components. The quilts are used to create Cut by Quilt features in models that interfere with the quilts.
3. Click Preview to see the model in 3D so you can decide whether or not to keep the changes you made.
4. Click OK to apply changes to the model or Cancel to restore the previous cutout shape. The dialog box closes.