About Opening Drawings

Creo Expert Moldbase Extension > Creo Expert Moldbase Extension Tools > About Opening Drawings

You can use one of the following commands to quickly open drawing files.

• Click EMX Assembly > Documentation >

Open drawing of current model to open a drawing with the same name as the current model.

• Click EMX Part Mode > EMX Tools >

Open drawing of current model to open a drawing with the same name as the current model.

• Click EMX Assembly > Documentation >

Open drawing of selected model and select a component in the current assembly.

• Click EMX Part Mode > EMX Tools >

Open drawing of selected model and select a component in the current assembly.

If there is no drawing, nothing happens.