Select one or more of the following search criteria to get information on particular product enhancements.
Items found: 11
If you don't have the codec already, you should be prompted to install it. If not, you can download it here.
VERICUT Version 6.0
VERICUT Version 6.0 has been integrated into Pro/ENGINEER.
G-POST Version 6.1
G-POST version 6.1 has been integrated into Pro/ENGINEER.
Degouging of the Tool Holder
You can degouge the tool holder during the computation of the tool path.
Roughing, Reroughing, and Finishing Tool Paths
In the Process Manager, you can directly create the roughing, reroughing, and finishing tool paths.
Corner Finishing Tool Path
You can automatically remove the remaining material in corners and valleys with the Corner Finishing tool path.
Direct Output of NURBS Interpolation
You can generate output of NURBS Interpolation for cutting motions.
Improved Quality for Surface Finishes
You can control the quality of surface finishes with parameters MAX_SEGMENT_LENGTH and POINT_DISTRIBUTION.
Machine Kinematics Simulation
Automated collision checking and machine kinematics for NC and CMM tool path simulation is now available.
Parameter Setup Dialog Box for NC and CMM
The redesign of the Parameter Setup dialog box for NC and CMM simplifies the definition of tool paths.
Manufacturing Components Toolbar
A Manufacturing Components toolbar simplifies the definition of manufacturing models
Automatic Creation of Workpieces
You can automatically create a manufacturing workpiece based on the reference model envelope.