Select one or more of the following search criteria to get information on particular product enhancements.
Items found: 20
If you don't have the codec already, you should be prompted to install it. If not, you can download it here.
Auto Cutline Option for Helical Type Toolpaths
You can create a helical cutline milling NC Step without creating the outer and inner cutlines.
CL Data Window
You can see CL Data while defining or editing a toolpath.
Chamfer and Round Milling NC Steps
There are dedicated toolpaths for Chamfer and Round milling, similar to those on Expert Machinist.
Controlling the Definition of the Finishing Sequence
It is easier to control the definition of the Finishing Sequence.
Cutline Milling Sequence is Independent of Surface Milling
Cutline Milling is separate from the rest of surface milling
Editing Steps While in the Process Manager
You can edit an NC step from a shortcut menu while working in the Process Manager.
Equal Distribution of Z-Constant Slices
There is equal distribution of z-constant slices in Roughing sequences.
Extra Slices in Cut Line Milling
Extra slices are added on nontangent sections.
Helical Machining of Complex Holes in Cutline Milling
You can machine complex multidiameter holes.
Helical Plunge and Ramp Motion Optimization in Volume and Roughing Milling
There are improvements to Plunge motions in Volume and Roughing Milling.
Helical Toolpath for 3-Axis Trajectory
There is a specialized toolpath for Helical machining.
Inclination of the S-Connection in Volume Milling
You can control the inclination of the S-Connection.
Manual Cycle to Define Turning Toolpaths
You can use a manual cycle to define turning toolpaths.
Minimizing Sharp Corners in the Finishing Sequence
You can smooth sharp corners in the finishing sequence.
Modern User Interface for NC Steps
There is a ribbon user interface for several NC Steps.
Projected Toolpath Option in Cutline Milling
You can machine complex cores and cavities
Rest Finishing NC Step
A new NC Step specializes on Rest Finishing.
Running NC Check from the Model Tree
You can run NC Check from the Model Tree.
Specifying a Start Point
You can define the machining start point using a dragger.
Tool Motions Availability
You can open Tool Motions for roughing, re-roughing, finishing, corner finishing, rest finishing, and 2-axis trajectory.